WRAS Approved Solenoid Valves - Normally Closed
SKU:
£83.10
£79.05 - £266.70
per item
Our range of high-quality WRAS approved solenoid valves are suitable for UK potable water supplies, and operate from a 0.1 bar pressure differential. They are designed for compliance with BREEAM WAT 04 requirements, to protect vulnerable toilet areas from leaks resulting in excessive water usage and potential flood damage when linked to a PIR Sensor. This range is held in normally closed position, and activation from a PIR sensor opens the valve to allow normal water flow to resume. They are available in a range of sizes from 3/8” to 2”.
Prices Include VAT And Free Delivery
Prices Include VAT And Free Delivery
Product Information
Product Description
Specification
Literature & Brochures
Delivery
Product Description
Solenoid Valves, when installed in conjunction with our PIR Sensors, can be used to control the water supply to a certain area. Our PIR sensor detects an infrared source (body heat) as it enters the room, once detected the sensor automatically triggers the solenoid valve to switch open, allowing normal water supply to resume. If the PIR sensor no longer detects a presence for a preset time (adjustable from 10 seconds to 40 minutes) the solenoid valve automatically shuts off the water supply again, protecting areas from potentially costly leaks from damaged ball valves and taps, and flood damage from burst pipes; it also protects areas at risk of deliberate acts of vandalism such as schools and municipal public toilets.
Key features of our WRAS Approved Solenoid Valve and PIR combination:
Water Saving
Automatically shuts off water supply off automatically when room becomes unoccupied
Convenient
Reduces the need to check unattended public spaces with water supplies such as washrooms
Suitable For
All commercial and domestic needs such as office and factory washrooms, hotels, schools and public toilets, holiday rentals
Easy to Install
With only 3 wire connections required: Live, neutral & switched live
Flexible Installation for every need
Multiple PIR sensors can be wired in parallel to cover larger spaces; while a single PIR sensor can control multiple valves, or multiple PIRs can be wired in parallel to control a single solenoid valve
Key features of our WRAS Approved Solenoid Valve and PIR combination:
Water Saving
Automatically shuts off water supply off automatically when room becomes unoccupied
Convenient
Reduces the need to check unattended public spaces with water supplies such as washrooms
Suitable For
All commercial and domestic needs such as office and factory washrooms, hotels, schools and public toilets, holiday rentals
Easy to Install
With only 3 wire connections required: Live, neutral & switched live
Flexible Installation for every need
Multiple PIR sensors can be wired in parallel to cover larger spaces; while a single PIR sensor can control multiple valves, or multiple PIRs can be wired in parallel to control a single solenoid valve
Specification
Body |
Brass |
Connection |
Female 3/8” to 2” BSP |
Suitable Media |
Water/Air/Oil/Inert Gases |
Valve Working Temperature |
-10C to 90C |
Coil Working Temperature |
80C Max |
Valve Closing Time |
10 msec |
Power Supply |
230v |
Coil |
14 Watt |
Standards/Compliance |
Coil: EN 60335-1 CE C102410 Connector: DIN 43650 |
Dimensions
Literature & Brochures
Delivery
|
Free UK delivery on all orders.
Solenoid Valve orders are fulfilled by our courier on next working day delivery (Monday to Friday). Purchases before 1pm, Monday to Friday, will be dispatch the same working day, any orders after this will be dispatched the following working day. |
|
Related Products
PIR Sensors
Solenoid Valves
Leak Detection
Popular Products
Water-King
Nova-Flo
Water Meters
Lifeline Spares & Accessories
PIR Sensors
Solenoid Valves